PIC16F88-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F88 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 5mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 7 |
| Number of I2C Channels | 1 |
| Height | 4.953mm |
| Length | 23.37mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F88-E/P Overview
To save space, it is included in the 18-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. In the package Tube, it is included. With a processor of PIC cores, the device is powered. In order to work effectively, the temperature should be kept at -40°C~125°C TA. There is FLASH program memory in it. There are 16 I/Os on the board. To find equivalent components, use its PIC16F88 base part number. DUAL is the position of its terminals on the board. This circuit consists of 18 terminationals. There are a number of electrical components in the PIC? 16F series, including this one. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 18 pins are used in its construction. Based on the Through Hole method, it is mounted. It has a total of 18 pins on it. The component is included in Microcontrollers. Using the devices' 7kB memory size, you can store programs and data. The maximum supply current is set at 5mA. A 5V source is used for powering it. Working at a frequency of 20MHz results in excellent efficiency. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. A total of 3 timers/counters have been set up. It is one of the members of the CPU family PIC. Internal is the oscillator type it uses.
PIC16F88-E/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F88-E/P Applications
There are a lot of Microchip Technology PIC16F88-E/P Microcontroller applications.
- Switches
- Security systems
- Information appliances (networking of household appliances)
- Instrument control
- Christmas lights
- Guidance-GPS
- Computer/laptop
- Routers
- Embedded gateways
- Fabric
