PIC16F88-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F88 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 890μA |
| RAM Size | 368 x 8 |
| Memory Type | FLASH, RAM |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 56 kb |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 7 |
| Number of PWM Channels | 1 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F88-I/SS Overview
There is a 20-SSOP (0.209, 5.30mm Width) package available to save space. The way of Surface Mount is used to mount it. It comes in a Tube package. The device runs in PIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 16 I/Os can be found on it. It has a part number of PIC16F88 that can be used to locate similar components. The terminals of this device are located at DUAL. 20 terminations are present in it. Part of the PIC? 16F series, this electrical component is used in a variety of applications. By using a 5V voltage supply, high efficiency is possible. As far as data storage is concerned, FLASH, RAM is used as the memory type. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. It is constructed with 20 pins. Mounting is performed in accordance with Surface Mount. It is equipped with 20 pins in total. It is one of the components included in Microcontrollers. A device with a memory size of 7kB can store programs and data. A 5V source of power is being used to run it. The system is highly efficient when working at a frequency of 20MHz. It appears that there are 3 timers/counters in use. PIC CPUs are included in this part. In order to maintain normal operation, Vsup must be above 4V. An oscillator type Internal is required for it to work.
PIC16F88-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F88-I/SS Applications
There are a lot of Microchip Technology PIC16F88-I/SS Microcontroller applications.
- Entertainment-radios, CD players, televisions
- Digital set-top boxes
- Hand-held metering systems
- Toys
- Printers
- Fire detection & safety devices
- Home appliances
- Industrial instrumentation devices
- Ipad
- Microwave ovens
