PIC16F883-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SPDIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | PIC® 16F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Frequency | 20MHz |
| Base Part Number | PIC16F883 |
| Interface | I2C, SPI, UART, USART |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Speed | 20MHz |
| RAM Size | 256 x 8 |
| Memory Type | FLASH |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Core Architecture | PIC |
| EEPROM Size | 256 x 8 |
| Max Frequency | 20MHz |
| Number of Programmable I/O | 24 |
| Number of UART Channels | 1 |
| Number of ADC Channels | 11 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F883-E/SP Overview
A space-saving advantage is that it is included in the 28-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. In the package Tube, it is included. It is equipped with a PIC core processor. Work should be done at -40°C~125°C TA. FLASH is the type of program memory used by it. The device has 24 I/Os. It has a base part number of PIC16F883 that can be used to find other components that are comparable. The PIC? 16F series includes this electrical component. For data storage, FLASH is used as its memory type. There are 28 pins used in the construction of this device. During the mounting process, the device is mounted based on the Through Hole method. It is possible to store programs and data on the devices, as they have a memory size of 7kB. The core architecture of the system is PIC. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. There are currently 3 timers/counters set up on the system. With a maximum frequency of 20MHz, the device operates. Temperatures below 125°C are suggested for operating. Working temperatures should be higher than -40°C. A chip with 24 programmable inputs/outputs is available. Using a Internal oscillator type, it works well.
PIC16F883-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Minimum temperature of -40°C
PIC16F883-E/SP Applications
There are a lot of Microchip Technology PIC16F883-E/SP Microcontroller applications.
- Process control devices
- Keyboards
- Set-top boxes
- Torpedo guidance
- Glucose monitoring systems (for Type 1 Diabetes)
- Guidance-GPS
- Virtual reality VR robots
- Computer/laptop
- Multi-meter
- DVD\DV\MP3 players
