PIC16F883-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F883 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Nominal Supply Current | 220μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 25 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F883-I/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is the way to mount it. Package Tube contains it. PIC core processor is present on the device. When working, the temperature should be kept at -40°C~85°C TA. FLASH is its program memory type. 24 I/Os have been provided by the device. In order to find similar components, it has a base part number of PIC16F883. The terminals of this device are set to DUAL. In this case, there are 28 terminationals. An electrical component such as this is included in the series PIC? 16F. The supply voltage of 5V allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed with 28 pins. The mounting of this device is carried out following the method of Through Hole. A total of 28 pins are attached to it. In Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 7kB. At a frequency of 20MHz, it exhibits excellent efficiency. It appears that there are 3 timers/counters in use. It is part of the PIC CPU family. A chip with 25 programmable inputs/outputs is available. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. The oscillator type Internal is used to operate the device.
PIC16F883-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F883-I/SP Applications
There are a lot of Microchip Technology PIC16F883-I/SP Microcontroller applications.
- Automatic staplers
- DDC control
- Current meter
- ECG machine
- Graphic terminals
- Accu-check
- Walkie talkies
- Volt meter
- Medical instruments chromatographs
- Heater/Fan
