PIC16F883-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F883 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Nominal Supply Current | 220μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 25 |
| Number of ADC Channels | 11 |
| Height | 1.8542mm |
| Length | 10.4902mm |
| Width | 5.588mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F883-I/SS Overview
For space savings, it is available in the 28-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. There is a Tube package available for it. It is equipped with a PIC core processor. During work, the temperature should remain at -40°C~85°C TA. FLASH is its program memory type. 24 I/Os have been provided by the device. It has a part number of PIC16F883 that can be used to locate similar components. At DUAL, its terminals are located. It has 28 terminationals. It is a member of the PIC? 16F series of electrical components. The supply voltage of 5V allows for high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A total of 28 pins are required to construct this device. This mount is done in accordance with the method of Surface Mount. On it, there are 28 pins. It is one of the components included in Microcontrollers. The devices have a memory size of 7kB that can be used to store programs and data. A 2.5/5V source of power is being used to run it. It is highly efficient when it works at a frequency of 20MHz. 3 counters/timers are currently active. CPU family PIC comprises the part. A chip with 25 programmable inputs/outputs is available. Normally, the supply voltage (Vsup) should remain above 4.5V. An oscillator of type Internal is used.
PIC16F883-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F883-I/SS Applications
There are a lot of Microchip Technology PIC16F883-I/SS Microcontroller applications.
- Traditional industrial transformation
- Glucose monitoring systems (for Type 1 Diabetes)
- Air fryers
- Instrument control
- Set-top boxes
- Embedded gateways
- Paper shredders
- Missile control
- 3D printers
- Wastewater treatment
