PIC16F886-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F886 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 11 |
| Number of SPI Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F886-E/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. In the package Tube, it is included. There is a PIC as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~125°C TA. There is FLASH program memory in it. There are 24 I/Os on the board. It has a part number of PIC16F886 that can be used to locate similar components. The terminals of this device are set to DUAL. In this case, there are 28 terminationals. There are a number of electrical components in the PIC? 16F series, including this one. As a result of the 5V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed with 28 pins. Based on the Through Hole method, it is mounted. On it, there are 28 pins. Subcategory Microcontrollers includes this component. Using the devices' 14kB memory size, you can store programs and data. Power is provided by a 2.5/5V source. This device achieves excellent efficiency at frequencies of 20MHz. 3 timer/counters are present. It is one of the members of the CPU family PIC. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.5V. It works with an oscillator type Internal.
PIC16F886-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F886-E/SP Applications
There are a lot of Microchip Technology PIC16F886-E/SP Microcontroller applications.
- Guidance-GPS
- DCS control intelligent sensor
- Aerospace navigation systems
- Data acquisition and control
- Ipad
- Teletext terminals
- Current meter
- Communication-bluetooth, Wi-Fi, radio
- Safety -airbags, automatic braking system (ABS)
- Process control devices
