PIC16F886-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ITS ALSO OPERATES MINIMUM 2V AT 8 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F886 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 4.8mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F886-E/SS Overview
As a result, it is available in the 28-SSOP (0.209, 5.30mm Width) package. The way of mounting it is Surface Mount. A package of Tube contains it. It is equipped with a PIC core processor. It is important to keep the temperature at -40°C~125°C TA while working. FLASH has been assigned to it as a program memory. There are 24 I/Os on it. To find equivalent components, use its PIC16F886 base part number. At DUAL, it has its terminals. Currently, it consists of 28 terminationals. The electrical component is part of the series PIC? 16F. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A total of 28 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. It has a total of 28 pins on it. It falls under the category of Microcontrollers. The devices have a maximum memory size of 14kB that can be used to store programs and data. Supply current is maximum at 4.8mA. At a frequency of 20MHz, it can achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. There are 3 timers/counters. This part is an integral part of the PIC CPU family. Moreover, it possesses the property of ITS ALSO OPERATES MINIMUM 2V AT 8 MHZ. An oscillator type Internal is required for it to work.
PIC16F886-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F886-E/SS Applications
There are a lot of Microchip Technology PIC16F886-E/SS Microcontroller applications.
- Sonography (Ultrasound imaging)
- Instrument control
- Toasters
- DCS control intelligent sensor
- Calculator
- Embedded gateways
- Industrial instrumentation devices
- Electromechanical control
- Robotic prosthetic limbs
- Automatic control
