PIC16F886-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F886 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 11 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F886-I/ML Overview
There is a 28-VQFN Exposed Pad package available to save space. This is mounted using the Surface Mount method. It comes in the package?of a Tube. The device has a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. 24 I/Os are present on the device. In order to find similar components, it has a base part number of PIC16F886. The terminals of this device are set to QUAD. A 28 termination is contained within it. PIC? 16F is the series number of this electrical component. High efficiency is possible due to the 5V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 28 pins are used. The mounting of this device is carried out following the method of Surface Mount. Total number of pins is 28. The component is included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 14kB. Power comes from a source of 2.5/5V. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. In total, there are 3 timers and counters. The part is a part of the PIC CPU family. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. An oscillator of type Internal is used.
PIC16F886-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F886-I/ML Applications
There are a lot of Microchip Technology PIC16F886-I/ML Microcontroller applications.
- Industrial instrumentation devices
- Medical instruments chromatographs
- Temperature sensing and controlling devices
- Equipment control
- Auto-breaking system
- Firewalls
- Instrument control
- DCS control intelligent sensor
- Automatic staplers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
