PIC16F886-I/SP
| Parameters | |
|---|---|
| EEPROM Size | 256 x 8 |
| Max Frequency | 20MHz |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 25 |
| Number of UART Channels | 1 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Supplier Device Package | 28-SPDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | PIC® 16F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Frequency | 20MHz |
| Base Part Number | PIC16F886 |
| Interface | I2C, SPI, UART, USART |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Nominal Supply Current | 220μA |
| Speed | 20MHz |
| RAM Size | 368 x 8 |
| Memory Type | FLASH |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Core Architecture | PIC |
PIC16F886-I/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. It is available in the Tube package. PIC core processor is present on the device. Work should be done at -40°C~85°C TA. Its type of program memory is FLASH. There are 24 I/Os on it. It has a base part number of PIC16F886 that can be used to find other components that are comparable. There are a number of electrical components in the PIC? 16F series, including this one. In terms of data storage, FLASH is used as the memory type. A number of 28 pins are used to construct it. A method of mounting is used, which is Through Hole. The devices have a maximum memory size of 14kB that can be used to store programs and data. PIC is the foundation of its architecture. It is highly efficient when it works at a frequency of 20MHz. 3 timers/counters are in use. A maximum frequency of 20MHz is used by the device. A temperature below 85°C is suggested for operation. Temperatures above -40°C are recommended for working. There are 25 programmable I/Os. There is an oscillator type Internal used in this circuit.
PIC16F886-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Minimum temperature of -40°C
PIC16F886-I/SP Applications
There are a lot of Microchip Technology PIC16F886-I/SP Microcontroller applications.
- Industrial instrumentation devices
- Light sensing & controlling devices
- Teletext terminals
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Radio
- Playstation
- Home video and audio
- Keyboards
- Ipad
- Smart highways (navigation, traffic control, information monitoring and car service)
