PIC16F886-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F886 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Nominal Supply Current | 220μA |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 25 |
| Number of ADC Channels | 11 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F886-I/SS Overview
As a result, it is available in the 28-SSOP (0.209, 5.30mm Width) package. Mounted using Surface Mount. There is a Tube package available for it. The device runs in PIC core processor. The temperature should be kept at -40°C~85°C TA while working. Its type of program memory is FLASH. There are 24 I/Os on the board. A component with the same part number as PIC16F886 can be compared to other similar components. DUAL is the position of its terminals on the board. A 28 termination is contained within it. An electrical component such as this is included in the series PIC? 16F. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. There are 28 pins used in the construction of this device. During the mounting process, the device is mounted based on the Surface Mount method. A total of 28 pins are attached to it. This is a component included in Microcontrollers. The devices have a memory size of 14kB that can be used to store programs and data. A 2.5/5V source is used for powering it. Working at a frequency of 20MHz results in excellent efficiency. 3 timer/counters are present. CPU family PIC comprises the part. There are 25 programmable I/Os in the device. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. There is an oscillator type Internal used in this circuit.
PIC16F886-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F886-I/SS Applications
There are a lot of Microchip Technology PIC16F886-I/SS Microcontroller applications.
- Guidance-GPS
- Speed meter
- Robots
- Routers
- Digital set-top boxes
- Blenders
- Ipad
- Medical instruments chromatographs
- Electrocardiogram (EKG)
- Smartphones-calling, video calling, texting, email
