PIC16F886T-I/SS
| Parameters | |
|---|---|
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F886 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 11 |
| Number of SPI Channels | 1 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
PIC16F886T-I/SS Overview
To save space, it is included in the 28-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. You can find it in the package of Tape & Reel (TR). The device has a PIC core processor. During work, the temperature should remain at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 24 I/Os have been provided by the device. A comparable component can be found by using the base part number PIC16F886. DUAL is the location of its terminals. 28 terminationals are present. It is a member of the PIC? 16F series of electrical components. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 28 pins are used in its construction. The mounting of this device is carried out following the method of Surface Mount. It has a total of 28 pins on it. This component is a part of Microcontrollers. Memory size for the devices is 14kB, which can be used to store programs and data. A 2.5/5V source of power is being used to run it. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 3 timers/counters are in use. It is part of the PIC CPU family. Normally, the supply voltage (Vsup) should remain above 4.5V. An oscillator of type Internal is used.
PIC16F886T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F886T-I/SS Applications
There are a lot of Microchip Technology PIC16F886T-I/SS Microcontroller applications.
- Microwave ovens
- Binding machines
- X-ray
- Answering machines
- Entertainment products
- Blood pressure monitors
- Home appliances
- Washing machines
- 3D printers
- Computers and laptops-video calling, email, blogging
