PIC16F88T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F88 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 5mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2.64mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F88T-I/SO Overview
It is available in the 18-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. The way of mounting it is Surface Mount. You can find it in the package of Tape & Reel (TR). It is equipped with a PIC core processor. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. 16 I/Os have been provided by the device. A component with the same part number as PIC16F88 can be compared to other similar components. The terminals of this device are set to DUAL. A 18 termination is contained within it. It is a member of the PIC? 16F series of electrical components. Because of the 5V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. 18 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. It has a total of 18 pins on it. It is one of the components included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 7kB. A maximum supply current of 5mA is set. Power comes from a source of 5V. This device achieves excellent efficiency at frequencies of 20MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. The number of timers and counters is 3. It is part of the PIC CPU family. There is an oscillator type Internal used in this circuit.
PIC16F88T-I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F88T-I/SO Applications
There are a lot of Microchip Technology PIC16F88T-I/SO Microcontroller applications.
- PDAs, game consoles
- Fabric
- Electronic jamming systems
- Information appliances (networking of household appliances)
- DVD\DV\MP3 players
- Computer/laptop
- Smart highways (navigation, traffic control, information monitoring and car service)
- Equipment control
- Switches
- Microwave ovens
