PIC16F913-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F913 |
| Pin Count | 28 |
| Number of Outputs | 23 |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 25 |
| Number of ADC Channels | 5 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F913-I/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. It comes in a Tube package. A core processor of PIC is present in the device. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 24 I/Os can be found on it. To find comparable components, use the PIC16F913 base part number. DUAL is the location of its terminals. This circuit consists of 28 terminationals. PIC? 16F is the series number of this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is constructed from 28 pins. It is mounted based on the method of Through Hole. 28 pins are on it in total. In Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 7kB. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. There are currently 3 timers/counters set up on the system. PIC CPUs are included in this part. There are 25 programmable input/output ports on the chip. The property ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ is also present in it. Using oscillator type Internal makes it work.
PIC16F913-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F913-I/SP Applications
There are a lot of Microchip Technology PIC16F913-I/SP Microcontroller applications.
- Telephone sets
- Removable disks
- Graphic terminals
- Industrial instrumentation devices
- Smoke alarms
- Calculator
- Oscilloscopes
- Set-top boxes
- Dialysis machines (performs function of liver)
- Magnetic resonance imaging (MRI)
