PIC16F913T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F913 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Voltage | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F913T-I/SS Overview
For the purpose of saving space, it is available in the 28-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. It comes in a Tape & Reel (TR) package. PIC core processor is present on the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 24 I/Os can be found on it. It has a base part number of PIC16F913 that can be used to find other components that are comparable. At DUAL, it has its terminals. As far as terminations are concerned, there are 28 terminations present. The PIC? 16F series contains this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 28 pins are used in its construction. It is mounted based on the method of Surface Mount. There are 28 pins on it. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 7kB. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. 3 timers/counters are in use. This part is part of the PIC family of CPUs. The property of ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ is also possessed by it. Using oscillator type Internal makes it work.
PIC16F913T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F913T-I/SS Applications
There are a lot of Microchip Technology PIC16F913T-I/SS Microcontroller applications.
- Washing machines
- Multi-meter
- Fax machines
- Refrigerators
- Set-top boxes
- Printers
- Calculator
- Sonography (Ultrasound imaging)
- Speed meter
- Calculators
