PIC16F914-I/PT
| Parameters | |
|---|---|
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 56 kb |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 36 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F914 |
| Pin Count | 44 |
| Number of Outputs | 34 |
| Lead Pitch | 500μm |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
PIC16F914-I/PT Overview
There is a 44-TQFP package available to save space. The way of mounting it is Surface Mount. It is available in the Tray package. There is a PIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. It has a number of 35I/Os. It has a part number of PIC16F914 that can be used to locate similar components. QUAD is the location of its terminals. As far as terminations are concerned, there are 44 terminations present. It is a member of the PIC? 16F series of electrical components. High efficiency is possible due to the 5V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. The structure is composed of 44 pins. It is mounted based on the method of Surface Mount. A total of 44 pins are attached to it. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 7kB which may be used to store programs and data. It performs extremely well at a frequency of 20MHz. 3 counters/timers are currently active. It belongs to the PIC CPU family. A chip with 36 programmable inputs/outputs is available. Normally, the supply voltage (Vsup) should remain above 4.5V. The oscillator type Internal is used to operate the device.
PIC16F914-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F914-I/PT Applications
There are a lot of Microchip Technology PIC16F914-I/PT Microcontroller applications.
- Electronic jamming systems
- Data acquisition and control
- Switches
- Nintendo
- Calculators
- Fire alarms
- PDAs, game consoles
- Digital set-top boxes
- Blenders
- Xbox
