PIC16F914T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F914 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F914T-I/ML Overview
To save space, it is included in the 44-VQFN Exposed Pad package. It is mounted using the way of Surface Mount. In the package Tape & Reel (TR), it is included. Devices with PIC core processors are available. The temperature should be kept at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. There are 35 I/Os on it. It has a part number of PIC16F914 that can be used to locate similar components. At QUAD, its terminals are located. It consists of 44 terminationals. The PIC? 16F series includes this electrical component. The supply voltage of 5V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 44 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. A total of 44 pins are attached to it. In the subcategory of Microcontrollers, this component is included. The devices have a memory size of 7kB that can be used to store programs and data. Using a frequency of 20MHz, it is very efficient. The supply voltage of 5V's adaptability can be fully utilised by designers. It appears that there are 3 timers/counters in use. This part is an integral part of the PIC CPU family. There is also the property of ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ. There is an oscillator type Internal used in this circuit.
PIC16F914T-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F914T-I/ML Applications
There are a lot of Microchip Technology PIC16F914T-I/ML Microcontroller applications.
- Accu-check
- Blenders
- Home video and audio
- Volt meter
- Calculator
- Hearing aids
- Teletext terminals
- Computers and laptops-video calling, email, blogging
- Air fryers
- Paper shredders
