PIC16F916T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F916 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 352 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2.64mm |
| Length | 17.87mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F916T-I/SO Overview
As a result, it is available in the 28-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. There is a Tape & Reel (TR) package available for it. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 24 I/Os on the board. To find equivalent components, use its PIC16F916 base part number. This device has terminals at DUAL. It has 28 terminationals. There are a number of electrical components in the PIC? 16F series, including this one. By using a 5V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 28 pins are used. The mounting of this device is carried out following the method of Surface Mount. 28 pins are on it in total. This component is a part of Microcontrollers. Using the devices' 14kB memory size, you can store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. Using 5V's adaptability as a supply voltage allows designers to maximize its use. The number of timers and counters is 3. It is part of the PIC CPU family. There is also a property of ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ on it. Using an oscillator type Internal, it operates.
PIC16F916T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F916T-I/SO Applications
There are a lot of Microchip Technology PIC16F916T-I/SO Microcontroller applications.
- Fax machines
- Television
- Equipment control
- Automatic control
- Food and beverage
- Accu-check
- Automatic staplers
- Industrial robot
- Telephone sets
- Security systems
