PIC16F917-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F917 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-N44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 20MHz |
| RAM Size | 352 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Clock Frequency | 20MHz |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | NO |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | ROHS3 Compliant |
PIC16F917-E/ML Overview
For space savings, it is available in the 44-VQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. Tube is the package that contains it. PIC core processor is present on the device. When working, the temperature should be kept at -40°C~125°C TA. FLASH is the type of program memory used by it. There are 35 I/Os on it, which makes it a very simple device. In order to find similar components, it has a base part number of PIC16F917. The terminals of this device are set to QUAD. It consists of 44 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. On it, there are 44 pins. The component is included in Microcontrollers. A 2/5.5V source is used for powering it. In the device, the clock runs at a frequency of 20MHz. As part of the PIC CPU family, this component is included. There is also the property of ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ associated with it. Normally, the supply voltage (Vsup) should remain above 4.5V. It works with an oscillator type Internal.
PIC16F917-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F917-E/ML Applications
There are a lot of Microchip Technology PIC16F917-E/ML Microcontroller applications.
- Microwave ovens
- Aerospace navigation systems
- Oscilloscopes
- Firewalls
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Telephone sets
- Smartphone
- Hand-held metering systems
- Process control devices
- Sonography (Ultrasound imaging)
