PIC16HV785-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16HV785 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 28kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 28 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Number of ADC Channels | 14 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 4.953mm |
| Length | 26.92mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16HV785-I/P Overview
For space savings, it is available in the 20-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. It is available in the Tube package. The device runs in PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH is its program memory type. A total of 17 I/Os are present. It has a base part number of PIC16HV785 that can be used to find other components that are comparable. At DUAL, its terminals are located. There are a total of 20 terminations in it. Part of the PIC? 16F series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 5V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 20 pins. During the mounting process, the device is mounted based on the Through Hole method. This device has a total of 20 pins. Microcontrollers contains this component. It is possible to store programs and data on the devices, as they have a memory size of 28kB. Using a frequency of 20MHz, it is very efficient. There are currently 3 timers/counters set up on the system. It is part of the PIC CPU family. 18 is the number of programmable I/O. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. It works with an oscillator type Internal.
PIC16HV785-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16HV785-I/P Applications
There are a lot of Microchip Technology PIC16HV785-I/P Microcontroller applications.
- Printers
- Kindle
- Microwave ovens
- Toys
- Entertainment products
- Graphic terminals
- Instrument control
- Electrocardiogram (EKG)
- Ipod
- PDAs, game consoles
