PIC16HV785T-I/SS
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16HV785 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 28kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
PIC16HV785T-I/SS Overview
Due to its space-saving qualities, it is available in the 20-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. This item can be found in package Tape & Reel (TR). A core processor of PIC is present in the device. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. A total of 17 I/Os are available on this device. Based on the PIC16HV785 base part number, it can be compared with other components. The terminals of this device are located at DUAL. A 20 termination is contained within it. It is a member of the PIC? 16F series of electrical components. The supply voltage of 5V allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 20 pins are used to construct it. Mounting is performed in accordance with Surface Mount. There are a total of 20 pins on it. In Microcontrollers, this component is included. The devices have a memory size of 28kB that can be used to store programs and data. There is 2.5/5V power source in this device. When working at a frequency of 20MHz it is able to achieve excellent efficiency. A total of 3 timers/counters have been set up. This part is an integral part of the PIC CPU family. There are 18 programmable I/Os in the device. There is also the property of OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ. Normally, the supply voltage (Vsup) should remain above 4.5V. There is an oscillator type Internal used in this circuit.
PIC16HV785T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16HV785T-I/SS Applications
There are a lot of Microchip Technology PIC16HV785T-I/SS Microcontroller applications.
- Hearing aids
- Mobile computers
- Smart instruments
- Fire alarms
- Computer/laptop
- Smartphones-calling, video calling, texting, email
- Current meter
- Firewalls
- Entertainment products
- Electromechanical control
