PIC16LC622A-04I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 4MHz |
| Base Part Number | PIC16LC622A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Memory Size | 3.5kB |
| Oscillator Type | External |
| Number of I/O | 13 |
| RAM Size | 128 x 8 |
| Memory Type | EPROM |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Supply Current-Max | 2mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 2048 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 4.32mm |
| Length | 22.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LC622A-04I/P Overview
As a result, it is available in the 18-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. This item can be found in package Tube. The device runs in PIC core processor. The temperature should be kept at -40°C~85°C TA while working. The type of memory in which this program is stored is OTP. There are 13 I/Os on it, which makes it a very simple device. In order to find similar components, it has a base part number of PIC16LC622A. A DUAL position is assigned to its terminals. It has 18 terminationals. The electrical component is part of the series PIC? 16C. By using a 5V voltage supply, high efficiency is possible. Data storage uses EPROM as its memory type. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 18 pins are required to construct this device. This mount is done in accordance with the method of Through Hole. A total of 18 pins are attached to it. It falls under the category of Microcontrollers. Memory size for the devices is 3.5kB, which can be used to store programs and data. It is important to note that the maximum supply current is 2mA. A 3/5V power source powers it. It performs extremely well at a frequency of 4MHz. The number of timers and counters is 1. It is a member of the PIC family of CPUs. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.7V. There is an oscillator type External used in this circuit.
PIC16LC622A-04I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LC622A-04I/P Applications
There are a lot of Microchip Technology PIC16LC622A-04I/P Microcontroller applications.
- Industrial robot
- Electronic jamming systems
- Auto-breaking system
- Heater/Fan
- Communication-bluetooth, Wi-Fi, radio
- Calculators
- Set-top boxes
- Heart rate monitors
- Refrigerators
- Light sensing & controlling devices
