PIC16LC770-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16LC770 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, SSP |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 256 x 8 |
| Memory Type | EPROM, OTP |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Bit Size | 8 |
| Data Converter | A/D 6x12b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 16 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LC770-I/P Overview
As a result, it is available in the 20-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. This item can be found in package Tube. With a processor of PIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. Memory type OTP is used for program memory. It has a number of 15I/Os. In order to find similar components, it has a base part number of PIC16LC770. The position of the device is DUAL at terminal. This circuit consists of 18 terminationals. The electrical component is part of the series PIC? 16C. Because the supply voltage is 5V, high efficiency can be achieved. Memory type EPROM, OTP is used for data storage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. There are 20 pins used in the construction of this device. The mounting of this device is carried out following the method of Through Hole. In total, it has 18 pins. This component is a part of Microcontrollers. Using the devices' 3.5kB memory size, you can store programs and data. This device achieves excellent efficiency at frequencies of 20MHz. 3 counters/timers are currently active. PIC CPUs are included in this part. There are 16 programmable I/Os. Normal operation requires a supply voltage (Vsup) above 2.5V. The oscillator type Internal is used to operate the device.
PIC16LC770-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LC770-I/P Applications
There are a lot of Microchip Technology PIC16LC770-I/P Microcontroller applications.
- Answering machines
- Automatic control
- Data acquisition and control
- Smoke alarms
- Playstation
- Toys
- Calculator
- Computer/laptop
- PDAs, game consoles
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
