PIC16LC770-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LC770 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, SSP |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 256 x 8 |
| Memory Type | EPROM |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Bit Size | 8 |
| Data Converter | A/D 6x12b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 16 |
| Height Seated (Max) | 1.98mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LC770-I/SS Overview
A space-saving advantage is that it is included in the 20-SSOP (0.209, 5.30mm Width) package. Surface Mount is the way to mount it. A package of Tube contains it. A core processor of PIC is present in the device. The temperature should be kept at -40°C~85°C TA while working. It has a type of program memory of OTP. A total of 15 I/Os are available on this device. Based on its base part number of PIC16LC770, other similarly-sized components can be found. DUAL is the position of its terminals on the board. This circuit consists of 20 terminationals. The PIC? 16C series includes this electrical component. The supply voltage of 5V allows for high efficiency. In data storage, EPROM is used as the memory type. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. There are 20 pins used in the construction of this device. The method of Surface Mount is used to mount it. It is equipped with 20 pins in total. It falls under the category of Microcontrollers. In order to store data and programs, the devices have a memory size of 3.5kB. It performs extremely well at a frequency of 20MHz. There are 3 timers/counters. This part is part of the PIC family of CPUs. There are a total of 16 programmable I/Os available. A supply voltage (Vsup) above 2.5V is necessary for normal operation. It works with an oscillator type Internal.
PIC16LC770-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LC770-I/SS Applications
There are a lot of Microchip Technology PIC16LC770-I/SS Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- DDC control
- Set-top boxes
- Data acquisition and control
- Xbox
- Smoke alarms
- Fabric
- Accu-check
- Computer/laptop
- Projectors
