PIC16LC773/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | PIC® 16C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LC773 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 256 x 8 |
| Memory Type | EPROM |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | OTP |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 6x12b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.99mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LC773/SS Overview
For space savings, it is available in the 28-SSOP (0.209, 5.30mm Width) package. In this case, it is mounted using the method of Surface Mount. It comes in a Tube package. A PIC core processor powers the device. The temperature should be kept at 0°C~70°C TA while working. OTP is the type of program memory used by it. A total of 22 I/Os are present. A comparable component can be found by using the base part number PIC16LC773. At DUAL, it has its terminals. It consists of 28 terminationals. There are a number of electrical components in the PIC? 16C series, including this one. High efficiency is possible due to the 5V supply voltage. As far as data storage is concerned, EPROM is used as the memory type. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 28 pins. This mount is done in accordance with the method of Surface Mount. Total number of pins is 28. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 7kB. Power is provided by a source of 5V. It is highly efficient when it works at a frequency of 20MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are currently 3 timers/counters set up on the system. This part is part of the PIC family of CPUs. Using an oscillator type of External, it works.
PIC16LC773/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LC773/SS Applications
There are a lot of Microchip Technology PIC16LC773/SS Microcontroller applications.
- Heart rate monitors
- Entertainment products
- Binding machines
- Guidance-GPS
- Toys
- Smart instruments
- Smoke alarms
- Current meter
- Process control devices
- Smartphones-calling, video calling, texting, email
