PIC16LF1503-E/MG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1503 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SPI |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Supply Current-Max | 1.8mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Low Power Mode | YES |
| Number of Programmable I/O | 12 |
| Integrated Cache | NO |
| RAM (words) | 128 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1503-E/MG Overview
For space savings, it is available in the 16-VFQFN Exposed Pad package. Surface Mount is the way to mount it. This item can be found in package Tube. There is a PIC as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~125°C TA. There is FLASH program memory in it. 11 I/Os have been provided by the device. Based on its base part number of PIC16LF1503, other similarly-sized components can be found. At QUAD, its terminals are located. As far as terminations are concerned, there are 16 terminations present. Part of the PIC? 16F series, this electrical component is used in a variety of applications. Because the supply voltage is 2.5V, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 16 pins are required to construct this device. It is equipped with 16 pins in total. The component is included in Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. The maximum supply current is set at 1.8mA. It is highly efficient when it works at a frequency of 20MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. A total of 3 timers/counters are present. CPU family PIC comprises the part. There are a total of 12 programmable I/Os. An oscillator of type Internal is used.
PIC16LF1503-E/MG Features
16-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1503-E/MG Applications
There are a lot of Microchip Technology PIC16LF1503-E/MG Microcontroller applications.
- Vacuum cleaners
- Digital set-top boxes
- Measuring revolving objects
- PDAs, game consoles
- Ipod
- Set-top boxes
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Projectors
- Coffee machines
- Speed meter
