PIC16LF1503-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1503 |
| Pin Count | 14 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SPI |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Supply Current-Max | 1.8mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Low Power Mode | YES |
| Number of Programmable I/O | 12 |
| Integrated Cache | NO |
| RAM (words) | 128 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1503-E/ST Overview
Due to its space-saving qualities, it is available in the 14-TSSOP (0.173, 4.40mm Width) package. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tube. PIC core processor is present on the device. Work should be done at -40°C~125°C TA. The type of memory it uses is FLASH. 11 I/Os have been provided by the device. To find comparable components, use the PIC16LF1503 base part number. The terminals of this device are located at DUAL. A 14 termination is contained within it. This electrical component is part of the PIC? 16F series. Using the 2.5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 14 pins are used to construct it. It is equipped with 14 pins in total. The component is included in Microcontrollers. The devices have a maximum memory size of 3.5kB that can be used to store programs and data. In this case, 1.8mA represents the maximum current supply. It is highly efficient when it works at a frequency of 20MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. A total of 3 timers/counters are present. It is one of the members of the CPU family PIC. 12 is the number of programmable I/O. An oscillator type Internal is required for it to work.
PIC16LF1503-E/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1503-E/ST Applications
There are a lot of Microchip Technology PIC16LF1503-E/ST Microcontroller applications.
- ECG machine
- Oscilloscopes
- Mice
- Equipment control
- Entertainment-radios, CD players, televisions
- DCS control intelligent sensor
- Electromechanical control
- Leakage current tester
- Playstation
- Fabric
