PIC16LF1503-I/MG
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1503 |
| Pin Count | 16 |
| Interface | I2C, SPI |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| Nominal Supply Current | 120μA |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Low Power Mode | YES |
| Number of Programmable I/O | 12 |
| Integrated Cache | NO |
| RAM (words) | 128 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Number of Ethernet Channels | 1 |
| Height | 900μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
PIC16LF1503-I/MG Overview
As a result, it is available in the 16-VFQFN Exposed Pad package. The way of Surface Mount is used to mount it. It comes in a Tube package. The device runs in PIC core processor. Work should be done at -40°C~85°C TA. Memory type FLASH is used for program memory. There are 11 I/Os on it. To find comparable components, use the PIC16LF1503 base part number. The terminals of this device are set to QUAD. This circuit consists of 16 terminationals. It is a member of the PIC? 16F series of electrical components. Because the supply voltage is 2.5V, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 16 pins are used in its construction. 16 pins are on it in total. It is one of the components included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 3.5kB. This device achieves excellent efficiency at frequencies of 20MHz. It appears that there are 3 timers/counters in use. The part is a part of the PIC CPU family. 12 is the number of programmable I/O. Using an oscillator type Internal, it operates.
PIC16LF1503-I/MG Features
16-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1503-I/MG Applications
There are a lot of Microchip Technology PIC16LF1503-I/MG Microcontroller applications.
- Instrument control
- Nintendo
- Missile control
- Heater/Fan
- Virtual reality VR robots
- Current meter
- Walkie talkies
- Hearing aids
- Dialysis machines (performs function of liver)
- Speed meter
