PIC16LF1507T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1507 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Supply Current-Max | 1.8mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Integrated Cache | NO |
| RAM (words) | 128 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1507T-I/SS Overview
Due to the benefits of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. The way of mounting it is Surface Mount. In the package Tape & Reel (TR), it is included. The device runs in PIC core processor. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 17 I/Os can be found on it. To find equivalent components, use its PIC16LF1507 base part number. The terminals of this device are located at DUAL. It has 20 terminationals. There are a number of electrical components in the PIC? 16F series, including this one. It is possible to achieve high efficiency with a 3.3V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 20 pins are used. This device has a total of 20 pins. This component is a part of Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. In this case, 1.8mA represents the maximum current supply. It performs extremely well at a frequency of 20MHz. There are currently 3 timers/counters set up on the system. This part is part of the PIC family of CPUs. The number of programmable inputs and outputs is 18. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.5V. Internal is the oscillator type it uses.
PIC16LF1507T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1507T-I/SS Applications
There are a lot of Microchip Technology PIC16LF1507T-I/SS Microcontroller applications.
- Blood pressure monitors
- Hard drives
- DVD\DV\MP3 players
- Firewalls
- Printers
- Volt meter
- Industrial robot
- Digital TVs
- Nintendo
- Calculator
