PIC16LF1508-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1508 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF1508-E/ML Overview
There is a 20-VFQFN Exposed Pad package available to save space. Using Surface Mount, it is mounted. It comes in the package?of a Tube. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~125°C TA. Memory type FLASH is used for program memory. A total of 17 I/Os are present. A comparable component can be found by using the base part number PIC16LF1508. This device has terminals at QUAD. 20 terminationals are present. Part of the PIC? XLP? 16F series, this electrical component is used in a variety of applications. By using a 3.3V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 20 pins are used to construct it. There are 20 pins on it. This component is a part of Microcontrollers. A device with a memory size of 7kB can store programs and data. It performs extremely well at a frequency of 20MHz. 3 timer/counters are present. It is a member of the PIC family of CPUs. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.5V. An oscillator of type Internal is used.
PIC16LF1508-E/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1508-E/ML Applications
There are a lot of Microchip Technology PIC16LF1508-E/ML Microcontroller applications.
- Microwave ovens
- Heater/Fan
- Printers
- Embedded gateways
- Routers
- DCS control intelligent sensor
- 3D printers
- Walkie talkies
- Auto-breaking system
- Electromechanical control
