PIC16LF1508T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1508 |
| Pin Count | 20 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 2.1mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b; D/A 1x5b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
PIC16LF1508T-I/SS Overview
There is an option to purchase it in the 20-SSOP (0.209, 5.30mm Width) package, which saves space. Mounted using Surface Mount. There is a Tape & Reel (TR) package available for it. The device has a PIC core processor. Work should be done at -40°C~85°C TA. Its type of program memory is FLASH. The device has 17 I/Os. A component with the same part number as PIC16LF1508 can be compared to other similar components. The position of the device is DUAL at terminal. Currently, it consists of 20 terminationals. There are a number of electrical components in the PIC? XLP? 16F series, including this one. The 3.3V supply voltage enables high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. For its construction, 20 pins are used. There are a total of 20 pins on it. It falls under the category of Microcontrollers. In order to store data and programs, the devices have a memory size of 7kB. Supply current cannot exceed 2.1mA. This device achieves excellent efficiency at frequencies of 20MHz. There are 3 timers/counters. It is a member of the PIC family of CPUs. The number 18 represents the number of programmable I/O ports on the board. Moreover, it also has the property of ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 16 MHZ. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.5V. The oscillator type Internal is used to operate the device.
PIC16LF1508T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1508T-I/SS Applications
There are a lot of Microchip Technology PIC16LF1508T-I/SS Microcontroller applications.
- Xbox
- Broadband technology, video and voice processing
- Smart instruments
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Smoke alarms
- DCS control intelligent sensor
- Torpedo guidance
- Calculator
- Hard drives
- Playstation
