PIC16LF1527-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1527 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 28kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| Nominal Supply Current | 300μA |
| RAM Size | 1.5K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 28KB 16K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 30x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 53 |
| Number of ADC Channels | 30 |
| Number of PWM Channels | 10 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF1527-I/PT Overview
Due to the benefits of saving space, it is available in the 64-TQFP package. Surface Mount is used for mounting. This item can be found in package Tray. With a processor of PIC cores, the device is powered. Work should be done at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 54 I/Os have been provided by the device. Other components that are comparable to it have the base part number PIC16LF1527. QUAD is the position of its terminals on the board. Currently, it consists of 64 terminationals. There are a number of electrical components in the PIC? XLP? 16F series, including this one. Because of the 3V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 64 pins are used to construct it. There are a total of 64 pins on it. This is a component included in Microcontrollers. The devices have a maximum memory size of 28kB that can be used to store programs and data. Working at a frequency of 20MHz results in excellent efficiency. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. 9 timers/counters are in use. This part is an integral part of the PIC CPU family. A chip with 53 programmable inputs/outputs is available. The oscillator type Internal is used to operate the device.
PIC16LF1527-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1527-I/PT Applications
There are a lot of Microchip Technology PIC16LF1527-I/PT Microcontroller applications.
- Magnetic resonance imaging (MRI)
- Torpedo guidance
- Robotic prosthetic limbs
- Traditional industrial transformation
- DVD\DV\MP3 players
- Fabric
- Current meter
- Electronic jamming systems
- Christmas lights
- Microwave ovens
