PIC16LF1782-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIC16LF1782 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PSMC, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 11x12b; D/A 1x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 25 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF1782-I/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. The way of Through Hole is used to mount it. You can find it in the package of Tube. The device has a PIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 24 I/Os can be found on it. To find equivalent components, use its PIC16LF1782 base part number. The terminals are positioned at DUAL. There are a total of 28 terminations in it. This electrical component is part of the PIC? XLP? 16F series. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 28 pins are used to construct it. This device has a total of 28 pins. The component is included in Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. There is a maximum current supply of 10mA. Working at a frequency of 32MHz results in excellent efficiency. A total of 3 timers/counters have been set up. It belongs to the PIC CPU family. A chip with 25 programmable inputs/outputs is available. There is an oscillator type Internal used in this circuit.
PIC16LF1782-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF1782-I/SP Applications
There are a lot of Microchip Technology PIC16LF1782-I/SP Microcontroller applications.
- Wastewater treatment
- Christmas lights
- PDAs, game consoles
- Security systems
- Smart highways (navigation, traffic control, information monitoring and car service)
- Digital set-top boxes
- Mice
- Teletext terminals
- Television
- Heart rate monitors
