PIC16LF1782-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1782 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Nominal Supply Current | 125μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PSMC, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x12b; D/A 1x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 25 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF1782-I/SS Overview
It is available in the 28-SSOP (0.209, 5.30mm Width) package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tube. With a processor of PIC cores, the device is powered. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. A total of 24 I/Os are present. A component with the same part number as PIC16LF1782 can be compared to other similar components. The terminals are positioned at DUAL. In this case, there are 28 terminationals. Part of the PIC? XLP? 16F series, this electrical component is used in a variety of applications. Using the 3V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 28 pins are required to construct this device. This device has a total of 28 pins. This component is a part of Microcontrollers. In order to store data and programs, the devices have a memory size of 3.5kB. Using a frequency of 32MHz, it is very efficient. There are 3 timers/counters. This part is an integral part of the PIC CPU family. A chip with 25 programmable inputs/outputs is available. Using oscillator type Internal makes it work.
PIC16LF1782-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1782-I/SS Applications
There are a lot of Microchip Technology PIC16LF1782-I/SS Microcontroller applications.
- Automatic staplers
- Accu-check
- Traditional industrial transformation
- Magnetic resonance imaging (MRI)
- Heart rate monitors
- Electrocardiogram (EKG)
- Electronic jamming systems
- Dryers
- Temperature sensing and controlling devices
- Fabric
