PIC16LF1825-E/P
| Parameters | |
|---|---|
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 12 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | MATTE TIN |
| Additional Feature | ALSO OPERATES 1.8V MINIMUM SUPPLY AT 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Base Part Number | PIC16LF1825 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
PIC16LF1825-E/P Overview
For the purpose of saving space, it is available in the 14-DIP (0.300, 7.62mm) package. Through Hole is used for mounting. There is a Tube package available for it. Devices with PIC core processors are available. When working, the temperature should be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. A total of 11 I/Os are present. Based on its base part number of PIC16LF1825, other similarly-sized components can be found. The terminals of this device are located at DUAL. As far as terminations are concerned, there are 14 terminations present. There are a number of electrical components in the PIC? XLP? mTouch? 16F series, including this one. Because the supply voltage is 3V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A number of 14 pins are used to construct it. Total number of pins is 14. Microcontrollers contains this component. Data and programs may be stored on the devices which have a memory size of 14kB. There is a source of power of 2/3.3V that powers this device. When working at a frequency of 32MHz it is able to achieve excellent efficiency. There are currently 5 timers/counters set up on the system. It is a member of the PIC family of CPUs. There are 12 programmable I/Os. ALSO OPERATES 1.8V MINIMUM SUPPLY AT 16 MHZ also belongs to it. Using a Internal oscillator type, it works well.
PIC16LF1825-E/P Features
14-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF1825-E/P Applications
There are a lot of Microchip Technology PIC16LF1825-E/P Microcontroller applications.
- Projectors
- Oil and gas
- Nintendo
- Laminators
- Tape drives
- Blood pressure monitors
- Traditional industrial transformation
- Electromechanical control
- Dialysis machines (performs function of liver)
- Coffee machines
