PIC16LF1825-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Supplier Device Package | 16-QFN (4x4) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ mTouch™ 16F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Frequency | 32MHz |
| Base Part Number | PIC16LF1825 |
| Interface | I2C, LIN, SPI, UART, USART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| Speed | 32MHz |
| RAM Size | 1K x 8 |
| Memory Type | FLASH |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| EEPROM Size | 256 x 8 |
| Max Frequency | 32MHz |
| Number of Programmable I/O | 12 |
| Number of UART Channels | 1 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 1 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF1825-I/ML Overview
For the purpose of saving space, it is available in the 16-VQFN Exposed Pad package. This is mounted using the Surface Mount method. Package Tube contains it. PIC core processor is present on the device. Working at -40°C~85°C TA temperature is recommended. Memory type FLASH is used for program memory. There are 11 I/Os on the board. Based on its base part number of PIC16LF1825, other similarly-sized components can be found. There are a number of electrical components in the PIC? XLP? mTouch? 16F series, including this one. Data storage uses FLASH as its memory type. It is constructed using 16 pins. The devices have a maximum memory size of 14kB that can be used to store programs and data. PIC forms the basis of its architecture. Using a frequency of 32MHz, it is very efficient. There are 5 timers/counters. 32MHz is the maximum frequency at which the device operates. It is suggested that the operating temperature be less than 85°C. It is recommended that the working temperature be greater than -40°C. There are 12 programmable I/Os. Using a Internal oscillator type, it works well.
PIC16LF1825-I/ML Features
16-VQFN Exposed Pad package
Mounting type of Surface Mount
Minimum temperature of -40°C
PIC16LF1825-I/ML Applications
There are a lot of Microchip Technology PIC16LF1825-I/ML Microcontroller applications.
- Heart rate monitors
- Smart instruments
- Smart highways (navigation, traffic control, information monitoring and car service)
- Speed meter
- Set-top boxes
- Virtual reality VR robots
- Computed Tomography (CT scan)
- Temperature sensing and controlling devices
- Communication-bluetooth, Wi-Fi, radio
- Safety -airbags, automatic braking system (ABS)
