PIC16LF1827-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Base Part Number | PIC16LF1827 |
| Pin Count | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 430μA |
| RAM Size | 384 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Height | 4.953mm |
| Length | 23.368mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF1827-I/P Overview
To save space, it is included in the 18-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. This item can be found in package Tube. PIC core processor is present on the device. Working at -40°C~85°C TA temperature is recommended. There is FLASH program memory in it. It has a number of 16I/Os. It has a part number of PIC16LF1827 that can be used to locate similar components. DUAL is the position of its terminals on the board. As far as terminations are concerned, there are 18 terminations present. The electrical component is part of the series PIC? XLP? mTouch? 16F. Because of the 3V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 18 pins are used. 18 pins are on it in total. It falls under the category of Microcontrollers. Using the devices' 7kB memory size, you can store programs and data. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. 3.3V offers full adaptability and voltage supply when it is employed by designers. It appears that there are 5 timers/counters in use. It is a member of the PIC family of CPUs. Internal is the oscillator type it uses.
PIC16LF1827-I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF1827-I/P Applications
There are a lot of Microchip Technology PIC16LF1827-I/P Microcontroller applications.
- Hearing aids
- Communication-bluetooth, Wi-Fi, radio
- Magnetic resonance imaging (MRI)
- Speed meter
- Information appliances (networking of household appliances)
- Coffee machines
- Answering machines
- Keyboards
- Teletext terminals
- Data acquisition and control
