PIC16LF1827T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1827 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 384 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1827T-I/ML Overview
There is an option to purchase it in the 28-VQFN Exposed Pad package, which saves space. Surface Mount is the way to mount it. It comes in a Tape & Reel (TR) package. Device with PIC core processor issupported. It is important to keep the temperature at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. 16 I/Os can be found on it. A comparable component can be found by using the base part number PIC16LF1827. The position of the device is QUAD at terminal. As far as terminations are concerned, there are 28 terminations present. The electrical component is part of the series PIC? XLP? mTouch? 16F. Because the supply voltage is 3V, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. Total number of pins is 28. It is one of the components included in Microcontrollers. In order to store data and programs, the devices have a memory size of 7kB. Supply current cannot exceed 8mA. When working at a frequency of 32MHz it is able to achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. There are currently 5 timers/counters set up on the system. PIC CPUs are included in this part. An oscillator of type Internal is used.
PIC16LF1827T-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1827T-I/ML Applications
There are a lot of Microchip Technology PIC16LF1827T-I/ML Microcontroller applications.
- Graphic terminals
- Electrocardiogram (EKG)
- Digital set-top boxes
- Oil and gas
- Current meter
- Information appliances (networking of household appliances)
- X-ray
- Air fryers
- Entertainment-radios, CD players, televisions
- Volt meter
