PIC16LF1847-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 1.8 V MINIMUM SUPPLY AT 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1847 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 1 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1847-E/SS Overview
A space-saving advantage is that it is included in the 20-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. Tube is the package that contains it. PIC core processor is present on the device. During work, the temperature should remain at -40°C~125°C TA. There is FLASH program memory in it. A total of 15 I/Os are present. Based on the PIC16LF1847 base part number, it can be compared with other components. DUAL is the location of its terminals. 20 terminations are present in it. It is a member of the PIC? XLP? mTouch? 16F series of electrical components. Using the 3V supply voltage allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 20 pins are required to construct this device. There are 20 pins on it. Subcategory Microcontrollers includes this component. It is possible to store programs and data on the devices, as they have a memory size of 14kB. A maximum supply current of 10mA is set. It performs extremely well at a frequency of 32MHz. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are currently 5 timers/counters set up on the system. There is also the property of 1.8 V MINIMUM SUPPLY AT 16 MHZ. An oscillator type Internal is required for it to work.
PIC16LF1847-E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1847-E/SS Applications
There are a lot of Microchip Technology PIC16LF1847-E/SS Microcontroller applications.
- PDAs, game consoles
- Communication-bluetooth, Wi-Fi, radio
- Accu-check
- Gas monitoring systems
- Refrigerators
- Telephone sets
- Vacuum cleaners
- Food and beverage
- Washing machines
- Instrument control
