PIC16LF1847T-I/MV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-UFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | 1.8 V MINIMUM SUPPLY AT 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1847 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 1 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 0.55mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1847T-I/MV Overview
For space savings, it is available in the 28-UFQFN Exposed Pad package. The way of mounting it is Surface Mount. Tape & Reel (TR) is the package that contains it. A core processor of PIC is present in the device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is the type of program memory used by it. It has a number of 15I/Os. To find equivalent components, use its PIC16LF1847 base part number. QUAD is the position of its terminals on the board. This circuit consists of 28 terminationals. There are a number of electrical components in the PIC? XLP? mTouch? 16F series, including this one. Because of the 3V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. There are 28 pins used in the construction of this device. 28 pins are on it in total. It is one of the components included in Microcontrollers. The devices have a memory size of 14kB that can be used to store programs and data. Supply current is maximum at 10mA. The system is highly efficient when working at a frequency of 32MHz. 3 timer/counters are present. There is also a property of 1.8 V MINIMUM SUPPLY AT 16 MHZ on it. During normal operation, the supply voltage (Vsup) should be kept above 2.5V. Using an oscillator type of Internal, it works.
PIC16LF1847T-I/MV Features
28-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1847T-I/MV Applications
There are a lot of Microchip Technology PIC16LF1847T-I/MV Microcontroller applications.
- Process control devices
- Current meter
- Smart highways (navigation, traffic control, information monitoring and car service)
- Dishwashers
- Oscilloscopes
- Data acquisition and control
- Equipment control
- Playstation
- Auto-breaking system
- Leakage current tester
