PIC16LF1907T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1907 |
| Pin Count | 44 |
| Operating Supply Voltage | 5.5V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | LIN, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | LINbus, UART/USART |
| Supply Current-Max | 1.7mA |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1907T-I/PT Overview
For the purpose of saving space, it is available in the 44-TQFP package. This is mounted using the Surface Mount method. Package Tape & Reel (TR) contains it. A core processor of PIC is present in the device. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 36 I/Os have been provided by the device. To find equivalent components, use its PIC16LF1907 base part number. At QUAD, it has its terminals. As far as terminations are concerned, there are 44 terminations present. An electrical component such as this is included in the series PIC? XLP? 16F. By using a 2.5V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. The structure is composed of 44 pins. In total, it has 44 pins. It is one of the components included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 14kB. The maximum supply current is 1.7mA. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. The supply voltage of 5.5V's adaptability can be fully utilised by designers. There are currently 2 timers/counters set up on the system. As part of the PIC CPU family, this component is included. Internal is the oscillator type it uses.
PIC16LF1907T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1907T-I/PT Applications
There are a lot of Microchip Technology PIC16LF1907T-I/PT Microcontroller applications.
- Set-top boxes
- Wastewater treatment
- Keyboards
- Process control devices
- Digital TVs
- Medical instruments chromatographs
- Robots
- DCS control intelligent sensor
- Virtual reality VR robots
- ECG machine
