PIC16LF1933-E/ML
| Parameters | |
|---|---|
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1933 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
PIC16LF1933-E/ML Overview
As a result, it is available in the 28-VQFN Exposed Pad package. Using Surface Mount, it is mounted. There is a Tube package available for it. There is a PIC as core processor in this device. Work should be done at -40°C~125°C TA. In terms of its program memory type, it is FLASH. 25 I/Os can be found on it. Based on its base part number of PIC16LF1933, other similarly-sized components can be found. The terminals of this device are located at QUAD. 28 terminationals are present. The PIC? XLP? 16F series contains this electrical component. It is possible to achieve high efficiency with a 3V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed with 28 pins. The method of Surface Mount is used to mount it. 28 pins are on it in total. Microcontrollers contains this component. In the device, there is a memory capacity of 7kB which may be used to store programs and data. It is powered by a 2/3.3V?source. It is highly efficient when it works at a frequency of 32MHz. There are 5 timers/counters. PIC CPUs are included in this part. It has the property of ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ as well. During normal operation, the supply voltage (Vsup) should be kept above 2.3V. Using oscillator type Internal makes it work.
PIC16LF1933-E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1933-E/ML Applications
There are a lot of Microchip Technology PIC16LF1933-E/ML Microcontroller applications.
- Industrial instrumentation devices
- DDC control
- Digital cameras
- Telephone sets
- Teletext terminals
- Medical instruments chromatographs
- DCS control intelligent sensor
- Paper shredders
- Microwave ovens
- Monitoring-temperature level, oil level, speed, distance, acceleration
