PIC16LF1933-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1933 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 5 |
| Height | 2.35mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF1933-I/SO Overview
It is available in the 28-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. Mounted using Surface Mount. You can find it in the package of Tube. A core processor of PIC is present in the device. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. The device has 25 I/Os. In order to find similar components, it has a base part number of PIC16LF1933. A DUAL position is assigned to its terminals. It has 28 terminationals. The electrical component is part of the series PIC? XLP? 16F. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 28 pins are used in its construction. The method of Surface Mount is used to mount it. There are 28 pins on it. The component is included in Microcontrollers. Memory size for the devices is 7kB, which can be used to store programs and data. Power comes from a source of 2/3.3V. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. The part is a part of the PIC CPU family. Normally, the supply voltage (Vsup) should remain above 2.3V. Using a Internal oscillator type, it works well.
PIC16LF1933-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1933-I/SO Applications
There are a lot of Microchip Technology PIC16LF1933-I/SO Microcontroller applications.
- Equipment control
- Process control devices
- Data acquisition and control
- Scanners
- Hand-held metering systems
- Oil and gas
- Routers
- Embedded gateways
- Missile control
- Graphic terminals
