PIC16LF1936-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1936 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 35 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1936-E/SS Overview
There is an option to purchase it in the 28-SSOP (0.209, 5.30mm Width) package, which saves space. The way of mounting it is Surface Mount. Package Tube contains it. There is a PIC as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. It has a number of 25I/Os. To find comparable components, use the PIC16LF1936 base part number. At DUAL, its terminals are located. 28 terminationals are present. The PIC? XLP? 16F series contains this electrical component. Using the 3.3V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A number of 28 pins are used to construct it. Based on the Surface Mount method, it is mounted. It has a total of 28 pins on it. In Microcontrollers, this component is included. In the device, there is a memory capacity of 14kB which may be used to store programs and data. A maximum supply current of 8mA is set. There is a source of power of 2/3.3V that powers this device. At a frequency of 32MHz, it exhibits excellent efficiency. 5 timer/counters are present. It belongs to the PIC CPU family. There are 35 programmable I/Os in the device. ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ also belongs to it. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.3V. Internal is the oscillator type it uses.
PIC16LF1936-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1936-E/SS Applications
There are a lot of Microchip Technology PIC16LF1936-E/SS Microcontroller applications.
- Information appliances (networking of household appliances)
- Entertainment-radios, CD players, televisions
- Volt meter
- Air fryers
- Petrochemical
- Temperature sensing and controlling devices
- Laminators
- Tape drives
- Pacemakers (used to control abnormal heart rhythm)
- Accu-check
