Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SSOP (0.209, 5.30mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
PIC® XLP™ 16F |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
3A991.A.2 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ |
Subcategory |
Microcontrollers |
Max Power Dissipation |
800mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Frequency |
32MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
PIC16LF1936 |
Pin Count |
28 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Interface |
I2C, LIN, SPI, UART, USART |
Memory Size |
14kB |
Oscillator Type |
Internal |
Number of I/O |
25 |
RAM Size |
512 x 8 |
Voltage - Supply (Vcc/Vdd) |
1.8V~3.6V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER, RISC |
Core Processor |
PIC |
Peripherals |
Brown-out Detect/Reset, LCD, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
8-Bit |
Program Memory Size |
14KB 8K x 14 |
Connectivity |
I2C, LINbus, SPI, UART/USART |
Supply Current-Max |
8mA |
Bit Size |
8 |
Data Converter |
A/D 11x10b |
Watchdog Timer |
Yes |
Has ADC |
YES |
DMA Channels |
NO |
Data Bus Width |
8b |
PWM Channels |
YES |
DAC Channels |
YES |
Number of Timers/Counters |
5 |
ROM (words) |
8192 |
EEPROM Size |
256 x 8 |
On Chip Program ROM Width |
14 |
CPU Family |
PIC |
Number of Programmable I/O |
35 |
Height Seated (Max) |
2mm |
Length |
10.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
PIC16LF1936T-I/SS Overview
As a result, it is available in the 28-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. You can find it in the package of Tape & Reel (TR). With a processor of PIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. It has a type of program memory of FLASH. A total of 25 I/Os are present. It has a base part number of PIC16LF1936 that can be used to find other components that are comparable. At DUAL, its terminals are located. In this case, there are 28 terminationals. There are a number of electrical components in the PIC? XLP? 16F series, including this one. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. For its construction, 28 pins are used. Mounting is performed in accordance with Surface Mount. 28 pins are on it in total. It falls under the category of Microcontrollers. Using the devices' 14kB memory size, you can store programs and data. It is important to note that the maximum supply current is 8mA. There is a source of power of 2/3.3V that powers this device. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. A total of 5 timers/counters have been set up. It is one of the members of the CPU family PIC. The number of programmable inputs and outputs is 35. Moreover, it possesses the property of ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ. During normal operation, the supply voltage (Vsup) should be kept above 2.3V. It works with an oscillator type Internal.
PIC16LF1936T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF1936T-I/SS Applications
There are a lot of Microchip Technology PIC16LF1936T-I/SS Microcontroller applications.
- Process control devices
- Information appliances (networking of household appliances)
- Toasters
- Toys
- Computed Tomography (CT scan)
- Multi-meter
- Sonography (Ultrasound imaging)
- Routers
- Automatic control
- X-ray