PIC16LF1937-I/MV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-UFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF1937 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF1937-I/MV Overview
A space-saving advantage is that it is included in the 40-UFQFN Exposed Pad package. The way of Surface Mount is used to mount it. You can find it in the package of Tube. The device has a PIC core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH has been assigned to it as a program memory. The device has 36 I/Os. A comparable component can be found by using the base part number PIC16LF1937. QUAD is the position of its terminals on the board. There are a total of 40 terminations in it. The PIC? XLP? 16F series contains this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 40 pins are used in its construction. According to Surface Mount, it is mounted. There are 40 pins on it. Memory size for the devices is 14kB, which can be used to store programs and data. The system is highly efficient when working at a frequency of 32MHz. It appears that there are 5 timers/counters in use. Moreover, it possesses the property of ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ. During normal operation, the supply voltage (Vsup) should be kept above 2.3V. Using an oscillator type Internal, it operates.
PIC16LF1937-I/MV Features
40-UFQFN Exposed Pad package
Mounting type of Surface Mount
PIC16LF1937-I/MV Applications
There are a lot of Microchip Technology PIC16LF1937-I/MV Microcontroller applications.
- Blood pressure monitors
- Home video and audio
- X-ray
- Volt meter
- Smart highways (navigation, traffic control, information monitoring and car service)
- Hard drives
- Playstation
- Virtual reality VR robots
- Teletext terminals
- Copiers
