PIC16LF627A-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2 V AT 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16LF627A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 1024 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Length | 22.86mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16LF627A-I/P Overview
Due to its space-saving qualities, it is available in the 18-DIP (0.300, 7.62mm) package. The way of Through Hole is used to mount it. Package Tube contains it. The device runs in PIC core processor. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. A total of 16 I/Os are available on this device. To find comparable components, use the PIC16LF627A base part number. DUAL is the position of its terminals on the board. It consists of 18 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 5V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 18 pins are required to construct this device. This mount is done in accordance with the method of Through Hole. There are 18 pins on it. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 1.8kB which may be used to store programs and data. Power is provided by a 2.5/5V source. When working at a frequency of 20MHz it is able to achieve excellent efficiency. 3 timer/counters are present. As part of the PIC CPU family, this component is included. ALSO OPERATES AT 2 V AT 4 MHZ also belongs to it. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. Internal is the oscillator type it uses.
PIC16LF627A-I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16LF627A-I/P Applications
There are a lot of Microchip Technology PIC16LF627A-I/P Microcontroller applications.
- Digital TVs
- Current meter
- 3D printers
- Graphic terminals
- Virtual reality VR robots
- Washing machines
- Routers
- Communication-bluetooth, Wi-Fi, radio
- Tape drives
- DDC control
