PIC16LF721-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF721 |
| Pin Count | 20 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 1 |
| Height | 1.75mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC16LF721-I/SS Overview
For space savings, it is available in the 20-SSOP (0.209, 5.30mm Width) package. In this case, it is mounted using the method of Surface Mount. It comes in a Tube package. A core processor of PIC is present in the device. During work, the temperature should remain at -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 17 I/Os on it. A comparable component can be found by using the base part number PIC16LF721. The terminals are positioned at DUAL. 20 terminationals are present. An electrical component such as this is included in the series PIC? 16F. It is possible to achieve high efficiency with a 3.3V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 20 pins are used to construct it. On it, there are 20 pins. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 7kB which may be used to store programs and data. At a frequency of 16MHz, it can achieve excellent efficiency. A total of 3 timers/counters are present. It is part of the PIC CPU family. An oscillator type Internal is required for it to work.
PIC16LF721-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF721-I/SS Applications
There are a lot of Microchip Technology PIC16LF721-I/SS Microcontroller applications.
- Set-top boxes
- Heart rate monitors
- Projectors
- Robotic prosthetic limbs
- Air fryers
- Petrochemical
- Virtual reality VR robots
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Walkie talkies
- Oscilloscopes
