PIC16LF721T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF721 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 1 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF721T-I/ML Overview
As a result, it is available in the 20-VFQFN Exposed Pad package. Surface Mount is the way to mount it. It comes in the package?of a Tape & Reel (TR). The device runs in PIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. The device has 17 I/Os. It has a part number of PIC16LF721 that can be used to locate similar components. At QUAD, its terminals are located. It consists of 20 terminationals. In the PIC? 16F series, this electrical component is found. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 20 pins are used in its construction. It has a total of 20 pins on it. This component is a part of Microcontrollers. The devices have a maximum memory size of 7kB that can be used to store programs and data. Using a frequency of 16MHz, it is very efficient. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. A total of 3 timers/counters are present. As part of the PIC CPU family, this component is included. Internal is the oscillator type it uses.
PIC16LF721T-I/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF721T-I/ML Applications
There are a lot of Microchip Technology PIC16LF721T-I/ML Microcontroller applications.
- Data acquisition and control
- Pacemakers (used to control abnormal heart rhythm)
- Set-top boxes
- DVD\DV\MP3 players
- Magnetic resonance imaging (MRI)
- Electronic jamming systems
- Graphic terminals
- Automatic staplers
- Answering machines
- Heater/Fan
