PIC16LF722-E/SO
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF722 |
| Pin Count | 28 |
| Interface | I2C, SCI, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 2.8mA |
| Bit Size | 8 |
| Data Converter | A/D 11x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16LF722-E/SO Overview
It is available in the 28-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. Surface Mount is the way to mount it. It is available in the Tube package. It is equipped with a PIC core processor. The temperature should be kept at -40°C~125°C TA while working. FLASH is the type of program memory used by it. It has a number of 25I/Os. In order to find similar components, it has a base part number of PIC16LF722. The terminals are positioned at DUAL. As far as terminations are concerned, there are 28 terminations present. Part of the PIC? XLP? 16F series, this electrical component is used in a variety of applications. The 3.3V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. This device has a total of 28 pins. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. Supply current is maximum at 2.8mA. This device achieves excellent efficiency at frequencies of 20MHz. The number of timers and counters is 3. It is a member of the PIC family of CPUs. The oscillator type Internal is used to operate the device.
PIC16LF722-E/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF722-E/SO Applications
There are a lot of Microchip Technology PIC16LF722-E/SO Microcontroller applications.
- Oscilloscopes
- Walkie talkies
- Hearing aids
- Safety -airbags, automatic braking system (ABS)
- Virtual reality VR robots
- Set-top boxes
- Process control devices
- Hard drives
- Printers
- Vacuum cleaners
