PIC16LF722-I/SS
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16LF722 |
| Pin Count | 28 |
| Interface | I2C, SCI, SPI, SSP, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 28 kb |
| CPU Family | PIC |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 16F |
PIC16LF722-I/SS Overview
There is a 28-SSOP (0.209, 5.30mm Width) package available to save space. Using Surface Mount, it is mounted. It is available in the Tube package. The device runs in PIC core processor. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. It has a number of 25I/Os. To find comparable components, use the PIC16LF722 base part number. A DUAL position is assigned to its terminals. 28 terminationals are present. Part of the PIC? XLP? 16F series, this electrical component is used in a variety of applications. By using a 3.3V voltage supply, high efficiency is possible. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. During the mounting process, the device is mounted based on the Surface Mount method. It has a total of 28 pins on it. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. 3 timers/counters are in use. It is a member of the PIC family of CPUs. An oscillator of type Internal is used.
PIC16LF722-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16LF722-I/SS Applications
There are a lot of Microchip Technology PIC16LF722-I/SS Microcontroller applications.
- Entertainment-radios, CD players, televisions
- Set-top boxes
- Ipad
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Data acquisition and control
- Hand-held metering systems
- Dishwashers
- Microwave ovens
- Fabric
- Walkie talkies
